RV Weight Distribution Tips for Packing Your RV

When packing your RV, it’s essential to consider the weight distribution to ensure a safe and enjoyable trip. Here are some tips to help you achieve optimal weight distribution.

Merriam-Webster defines weight as the force with which a body is pulled toward the earth. Everything around us feels this gravitational pull. Then you add the forces of movement which can magnify the effect of weight, and … well, you get the point.

Weight and loading are important for an airplane so it will lift off the ground and for a ship so it won’t roll over and they are important for your RV, not only to make sure it will last a long time without premature wear or component failure but also so it will be safe to drive on the highways and back roads.

Distribute weight evenly © Rex Vogel, all rights reserved

There are a number of resources for RVers to reference regarding the weight of their RV. Owner’s manuals usually provide weight and loading information as do numerous websites.

One organization, the RV Safety and Education Foundation (RVSEF) has dedicated its existence to the issues of RV weight and loading. It’s an important topic that every RVer should understand.

RV weight distribution, however, is something not a lot of RV owners think about. This is unfortunate because ensuring that all of the weight in your RV is evenly distributed is incredibly important for safety reasons. 

Trailers with cargo that haven’t been distributed across the rig evenly are more likely to sway. Additionally, all RVs that are loaded unevenly (or even overloaded) can suffer from suspension issues, problems with tires, and in some cases, issues with steering.

These are not things you want to have trouble with while on a road trip. Fortunately, this is an easy problem to avoid. The solution is of course to ensure that everything is loaded into your rig properly. 

Here are my tips for packing up your motorhome or trailer with RV weight distribution in mind. 

Distribute weight evenly © Rex Vogel, all rights reserved

Know your limits

First and foremost, you want to know the limits of your rig. This includes the cargo-carrying capacity of your RV, the tow limits of your truck (if applicable) as well as the gross axle weight rating (the amount that can be put on any given axle).

Knowing these numbers and ensuring you stay well within the given boundaries is the first step in properly loading your RV. 

Pick and choose

Knowing your limits is a good starting point. The next step is deciding what you will take and what you’ll have to leave behind in order to stay within those limits. Packing light is the name of the game: versatile items that can serve multiple purposes, small items, and lightweight options are ideal.

Obviously, you will only want to take the essentials. Leave unnecessary items at home. But taking some toys or outdoor gear is probably fine. Just so in moderation and keep those weight limits in mind. 

Distribute weight evenly © Rex Vogel, all rights reserved

Keep things balanced

Once you know the basic parameters you are working with and what you will pack, the next thing to do is actually move the items into the RV. Keep things as balanced as possible—from side-to-side and front-to-back.

Take note of where appliances and slides are. Those things are heavy and should be taken into consideration as you decide where items should be stored. Use all of your storage bays and spread things out evenly between them. If most of your cabinets are on one side of the RV, try to put heavy items on the opposite side to balance out what you’d store in the cabinets. 

Heavy items low and centered

Have some especially heavy items you need to pack? Those should be kept on the floor and on top of an axle. This will help prevent the heavy item from putting too much weight on the front or back. Storing on the floor also ensures the item doesn’t fall, break things, and/or hurt people while the RV is in transit.

If you can, pack an item of similar weight on the opposite side or pack the heavy item opposite your main kitchen appliances in order to even things out from side to side.

Distribute weight evenly © Rex Vogel, all rights reserved

How to load drawers and cabinets

Another thing to keep in mind as you’re loading up the RV is how to load the drawers and cabinets.

You want to make sure only lightweight things are in the overhead cabinets in order to help keep things balanced and keep your passengers safe if you’re in a motorhome. Meanwhile, the drawers should not be overloaded as this can break them—and if all of your drawers are on one side of the RV (as is often the case), you’ll be putting a lot of weight in one area and throwing off the balance of the rig. 

Keep tank locations in mind

Water is heavy. It weighs in at 8.34 pounds per gallon meaning a 40-gallon tank weighs over 333 pounds when full. That’s a lot of weight and it can easily put you over your cargo-carrying capacity and out of balance.

If you plan to drive with a full fresh water or waste tanks make sure you know where that particular tank is located and try to pack everything in such a way that the extra weight is balanced out and you aren’t over your RV’s weight limit. 

Distribute weight evenly © Rex Vogel, all rights reserved

Observe before you drive

Once everything is loaded into the RV, it’s time for a visual inspection. Head outside and look at the rig. Make sure it isn’t obviously leaning to one side or the other. If you pull a trailer, make sure the trailer isn’t weighing down the truck and make sure the bottom of the trailer is parallel with the ground.

Essentially, you are looking for any signs that you’ve overloaded the RV or that the weight inside isn’t balanced. You will want to add this visual inspection to your pre-trip walk-around every time you drive. 

Go get weighed

Unfortunately, it’s very difficult to know whether you’re overloaded and almost impossible to know whether one axle is taking the brunt of the work without getting properly weighed. Even if everything looks good from the outside, you could still be totally out of balance. For this reason, it’s best to head to a nearby truck scale to be weighed after you’ve loaded up the RV. These can usually be found at truck stops and will give you tons of information about how your RV is loaded. 

Check this out to learn more: Should I Weigh My RV?

Yes, RV weight distribution is an incredibly important thing. Luckily, you know this now and can take the steps above to prevent any dangerous situations caused by uneven weight distributions from cropping up during your RV travels.

Worth Pondering…

Experience: that most brutal of teachers. But you learn, my God do you learn.

—C.S. Lewis